CCTV repairs and maintenance

We repair and service CCTV systems, including ones another installer put in, and price every job by quote. Tell us on WhatsApp what is wrong, how many cameras there are and the make of the recorder, with a photo of its screen if you can, and we will say what the visit involves before any work starts.

A maintenance visit checks each camera, the cables and power, the recorder and its drive, and phone viewing.

Prices as at 16 November 2026. Fully installed.

Faults we are often asked about

  • No picture on one camera, often shown as video loss or no video: usually a power adapter, a cable joint or the camera itself.
  • Black or blurry at night: the camera's infrared night lights have failed, or dirt and spider webs on the lens scatter them.
  • Foggy or spotted picture: water inside the camera housing, or a dirty lens.
  • The recorder beeps or shows a hard drive error: the drive is failing, not formatted, or not detected.
  • Fewer days recorded than expected: a drive too small for the cameras, or settings that record more than needed.
  • Wrong date and time on recordings: the recorder's clock has drifted or was never set.
  • Phone viewing stopped: a new router, a changed password, or the site's data has run out.
  • Cameras failing after the power changes over: surges between grid and generator can damage adapters.

What a maintenance visit checks

  • Every camera: the picture by day and at night, the focus, the angle still on its target, a clean lens, and a housing sealed against rain.
  • Cable joints and connectors for rust and looseness, and trunking still in place.
  • Power supplies and adapters, including the voltage reaching the farthest cameras.
  • The recorder: every channel recording, the health of the drive, the number of days actually kept, and the date and time.
  • Phone viewing on the owners' phones, and who still has access.
  • Backup power, if there is a UPS, and whether its battery still holds a charge.

Afterwards we tell you what we found and what, if anything, needs fixing, with a quote for any parts.

Systems we did not install

We work on systems put in by other installers. Hikvision and Dahua systems are the most straightforward, since we know their recorders and apps well. For other makes we find the fault and tell you plainly whether repair is worth it, and where a part is beyond saving, we offer a Hikvision or Dahua replacement.

Have the recorder's admin password ready, or tell us if nobody has it, as that changes what the visit involves. If a system is old and several parts have failed, replacing it can make more sense; the planner shows the installed price of a new one, from ₦245,000 as at 16 November 2026.

How to ask for a repair or service

  1. Contact us on WhatsApp or by phone on 0802 859 5303, saying what is wrong, the number of cameras, the recorder's make and your town.
  2. Send photos: the recorder's screen, the faulty camera's picture, and the label on the recorder.
  3. We reply with a quote, or tell you if we need to see the system first to find the fault.
  4. Once you accept, we agree a visit with you.

Keeping a system healthy between visits

  • Play back a few minutes from yesterday once a week, to be sure every camera is still recording.
  • Keep plants and branches away from cameras, and wipe dust off the lenses during the harmattan.
  • Keep the recorder off the floor, somewhere ventilated and away from water.
  • Shut the recorder down from its menu rather than pulling the plug.
  • Change the default passwords, and keep them where the right people can find them.

Questions and answers

How much does CCTV repair cost?

It depends on the fault and the parts, so we quote each job. Send the details on WhatsApp and we will tell you what is involved.

Do you repair CCTV systems you did not install?

Yes. Systems from other installers are welcome. Where a part cannot be repaired, the quote offers a Hikvision or Dahua replacement.

Why does my CCTV say video loss?

The recorder has lost the signal from that camera. Most often the camera has lost power or a cable joint has failed; less often the camera itself is faulty.

Why is my CCTV only keeping a few days?

The drive may be too small for the number of cameras, the recording settings may be heavier than needed, or the drive may be failing. Each Full HD camera uses roughly 12 GB of drive a day; see how long CCTV footage is kept.

How often should CCTV be serviced?

Once or twice a year suits most systems, and more often where dust or salty sea air settles on the cameras. Between visits, a weekly look at playback catches most problems early.

Where to go next

Tell us what you need.

Send us a few photos or a short video of the place on WhatsApp and we reply with a price.