Smart-ready buildings: cabling for solar, cameras and Starlink
A smart-ready building has the conduits, wiring and cable routes for solar, cameras, smart switches and Starlink laid while it is being built. Doing it before plastering spares you cutting into finished walls and ceilings later.
Ask for it in your written quote. The systems themselves come later, or at the same time, from ZuraLink Power, Secure, Home and Connect.
Why cabling goes in during the build
In most Nigerian houses, cables run inside conduit pipes buried in the blockwork and covered by plaster, or above the ceiling. Once the plaster, tiles and paint are on, adding a cable means cutting a channel in the wall, patching it and repainting, or leaving plastic trunking running along the surface. Laying the conduit while the walls are still bare costs far less than that and leaves nothing on show.
It also means the house is ready when you are. You might add solar now and cameras in the future, and the routes for both are already waiting in the walls.
What we build in for each ZuraLink line
- Solar and an inverter, from ZuraLink Power: conduits and wiring from the roof down to a space set aside for the inverter and batteries, so the panels can be connected when they arrive.
- Cameras, intercom and the gate, from ZuraLink Secure: conduits to the camera points, to the intercom and to the gate.
- Smart switches and curtains, from ZuraLink Home: switch boxes and wiring that suit smart switches, and power at the windows where curtain motors will go.
- Starlink, through ZuraLink Connect: a place for the dish and a cable route down to where the router will sit.
When each part goes in
Smart-ready work fits inside the five building stages rather than adding a new one. Most of it happens at two points. Any conduit meant to run beneath the ground floor goes down with the foundation, before the slab is cast. Wiring in the walls is run during finishing, before the plaster closes them. That is why it has to be planned before the foundation starts: a route that was never laid under the slab cannot be added later without breaking it.
The equipment itself, the panels, cameras, switches and dish, is fitted at handover or afterwards by the ZuraLink line concerned.
What it costs
The conduits and wiring are building work, so they appear in your written quote for the house, in the stage where they are laid. The calculator's guide figures do not show them as a separate line. The equipment that later goes into them, the panels and inverter, cameras, smart switches and Starlink kit, is priced by each ZuraLink line on its own site and is not part of a Spaces quote. To see what the building itself might cost, try the cost calculator.
For houses already standing
If your house is still a carcass, with walls not yet plastered, it is not too late: the routes can go in as part of finishing an uncompleted house. In a finished house, a renovation that opens walls or ceilings is the next good chance to run them.
How to ask
Once the calculator shows your building, the "Get my written quote" button passes it to us; a message or call to 0802 859 5303 works as well. Tell us which of the four you want built in, even if the equipment comes much later. We ask about the site and drawings on WhatsApp, and the cable routes are shown in the written quote, stage by stage.
Questions and answers
What is a smart-ready house?
One built with the conduits, wiring and cable routes for solar, cameras, smart switches and internet already in the walls, so the equipment can be fitted without breaking finished walls.
Is the solar or camera equipment included?
No. The building quote covers the routes and wiring. The equipment is priced by ZuraLink Power, ZuraLink Secure or ZuraLink Home.
Can a finished house be made smart-ready?
Yes, though it means opening walls or ceilings, so it fits naturally into a renovation. Before plaster is the easier time.
Where does the Starlink dish go?
Somewhere with a clear view of the sky, usually on the roof. We leave a place for it and a cable route to the router, and the kit comes through ZuraLink Connect.
Where to go next
- Building cost calculatorYour building, stage by stage
- Cost of finishing a houseFinishing and handover
- Cost of building a house in NigeriaEvery reference building and place
- The five stagesGuide
- What finishing coversGuide